Structural repair, not a new gate?

We weld on site. Posts, frames, hinges and rails get repaired where they stand.

Can you work from a photograph?

Yes. A photograph of the detail you want matched is usually more useful than a description of it.

Does custom mean a different scale of job?

Not necessarily. Where the opening is an odd width or the pier is not square, a made piece is often the only thing that fits at all.

Can ornamental ironwork be repaired?

Frequently — that is welding and dressing rather than replacement, and it happens on site where the piece is already fixed.

Custom Fabrication & Welding in Dania Beach, FL

Welding arc flaring as a bead is laid on a steel frame in a dark shop

In the shop · Dania Beach, FL

Designed, cut, welded and finished in-house, then hung by the people who built it.

Get a quote

(954) 245-0182

Aerial view of a coastal residential street, its rear gardens enclosed by hedging and fencing. — The coastal strip — The barrier island and the streets immediately behind it, from the county line up to the Hillsboro Inlet.

Dania Beach · Broward County

Cut list, jig, weld, dress, finish, hang. Keeping all six steps in one place is why a one-off is possible at all — nothing has to be ordered to a standard size, and the people who fabricated it are the people who hang it.

Ornamental work this close to the water is a materials conversation first. What gets drawn has to survive the exposure, which rules some sections and some finishes out before the design starts.

Spray carries further inland than people expect, which is why a finish specified here is not the one specified well away from the water.

One code, many counters

The wind-load requirement in Dania Beach is the High-Velocity Hurricane Zone standard that governs the whole of Broward. The review that sits on top of it is local, and in a county this dense with planned communities an association's architectural approval is frequently the longer of the two.

Custom & Welding — the full breakdown

Before / after

Drag it backto how we found it.

Drag the divider to see the change. Where a frame is marked Concept it illustrates the starting point rather than photographs it.

Illustration of bare cut steel sections clamped on the bench before welding — FabricationBare steel to welded panel

Fabricator welding the finished panel in place on site — FabricationBare steel to welded panel

Custom & Welding · Dania Beach

06 frames

Tall ornate iron gate with scrollwork between stone pillars and lanterns

Scrollwork and lanterns

Torch cutting through steel box section on a bench with sparks pouring off — Cutting the sections

Angle grinder throwing a fan of sparks off a steel edge — Dressing the edge

Fabricator welding an aluminum picket fence panel in place on site — Welded on site

Sparks falling in front of a metal fence panel being worked on — Sparks off the panel

Gilded heraldic crest mounted on an ornamental iron gate — Crest, gilded

No sales script

Cut and welded here
On-site welding
Ornamental ironwork
Drawn in-house
Specified for salt exposure

Structural repair, not a new gate?: We weld on site. Posts, frames, hinges and rails get repaired where they stand.
Can you work from a photograph?: Yes. A photograph of the detail you want matched is usually more useful than a description of it.
Does custom mean a different scale of job?: Not necessarily. Where the opening is an odd width or the pier is not square, a made piece is often the only thing that fits at all.
Can ornamental ironwork be repaired?: Frequently — that is welding and dressing rather than replacement, and it happens on site where the piece is already fixed.