I have a sketch, not a drawing.

A sketch is enough to start. We draw it properly and show you the gate on your entrance.

Can you match something that already exists?

Yes — an existing panel, a neighbouring property's detail, or a piece of the house itself.

Structural repair, not a new gate?

We weld on site. Posts, frames, hinges and rails get repaired where they stand.

Can you work from a photograph?

Yes. A photograph of the detail you want matched is usually more useful than a description of it.

Custom Ironwork & Gate Matching in Homestead, FL

Welding arc flaring as a bead is laid on a steel frame in a dark shop

Matching what exists · Homestead, FL

An existing panel, a neighbouring run, or a detail off the house itself.

Get a quote

(954) 245-0182

Solar panel mounted above a white ornamental gate, with the operator box sitting at its foot. — The south corridor — Down US-1 toward the agricultural edge, where lots widen again and mains power is not a given.

Homestead · Miami-Dade County

Half of custom work is not inventing anything. It is reproducing a picket profile, a scroll or a cap that already exists on the property so the new piece does not announce itself as new.

Out here it is as often structural welding as ornament: posts, frames, hinges and rails repaired where they stand rather than carted back to a shop.

Long driveways mean long runs, and every extra foot of run is another decision about power, voltage drop and control.

Two approvals, not one

Anything structural at the property line in Miami-Dade answers to the High-Velocity Hurricane Zone standard, and that is what sets the frame and the fixings. Separately, Homestead runs a local review, and where a homeowners' association governs the street it generally runs one of its own. Neither is a thing to discover after fabrication.

Custom & Welding — the full breakdown

Before / after

Drag it backto how we found it.

Drag the divider to see the change. Where a frame is marked Concept it illustrates the starting point rather than photographs it.

Illustration of bare cut steel sections clamped on the bench before welding — FabricationBare steel to welded panel

Fabricator welding the finished panel in place on site — FabricationBare steel to welded panel

Custom & Welding · Homestead

06 frames

Angle grinder throwing a fan of sparks off a steel edge

Dressing the edge

Fabricator welding an aluminum picket fence panel in place on site — Welded on site

Sparks falling in front of a metal fence panel being worked on — Sparks off the panel

Gilded heraldic crest mounted on an ornamental iron gate — Crest, gilded

Tall ornate iron gate with scrollwork between stone pillars and lanterns — Scrollwork and lanterns

Torch cutting through steel box section on a bench with sparks pouring off — Cutting the sections

Straight answers

Ornamental ironwork
Drawn in-house
Cut and welded here
On-site welding
Solar & battery options

I have a sketch, not a drawing.: A sketch is enough to start. We draw it properly and show you the gate on your entrance.
Can you match something that already exists?: Yes — an existing panel, a neighbouring property's detail, or a piece of the house itself.
Structural repair, not a new gate?: We weld on site. Posts, frames, hinges and rails get repaired where they stand.
Can you work from a photograph?: Yes. A photograph of the detail you want matched is usually more useful than a description of it.