Does custom mean a different scale of job?

Not necessarily. Where the opening is an odd width or the pier is not square, a made piece is often the only thing that fits at all.

Can ornamental ironwork be repaired?

Frequently — that is welding and dressing rather than replacement, and it happens on site where the piece is already fixed.

Can a two-leaf gate work on my frontage?

If the setback gives the leaves somewhere to open into, yes — that gets measured on site before anything is drawn.

A pair halves the arc each leaf needs and doubles the hardware. Opening width and setback usually settle it between them.

On-Site Welding & Structural Repair in Jupiter, FL

Sparks falling in front of a metal fence panel being worked on

On-site welding · Jupiter, FL

Posts, frames, hinges and rails repaired in place rather than carted away.

Get a quote

(954) 245-0182

Grey perforated-panel modern gate across a driveway beneath a cantilevered house overhang. — The north county — From the city up to the Loxahatchee — newer construction, wider frontages, more slide gates than swings.

Jupiter · Palm Beach County

Not everything needs to become a new gate. A cracked hinge boss, a post that has moved, a rail that has torn away from its stile — those are structural repairs, and they happen on site with the gate still hanging.

Estate frontage is where scrollwork, cast detail and a properly matched pair are worth the shop time, because there is enough opening to actually see them.

Wider frontages tend to favour a slide or a long swing pair, and both want the ground under them prepared properly.

Outside the HVHZ — a different set of paperwork

Palm Beach County sits outside the High-Velocity Hurricane Zone that governs Miami-Dade and Broward. Wind still decides the frame here; the product-approval paperwork is simply a different set. Permitting in Jupiter is administered locally, so confirm what is expected before fabrication starts.

Custom & Welding — the full breakdown

Custom & Welding · Jupiter

06 frames

Angle grinder throwing a fan of sparks off a steel edge

Dressing the edge

Welding arc flaring as a bead is laid on a steel frame in a dark shop — The arc

Fabricator welding an aluminum picket fence panel in place on site — Welded on site

Gilded heraldic crest mounted on an ornamental iron gate — Crest, gilded

Tall ornate iron gate with scrollwork between stone pillars and lanterns — Scrollwork and lanterns

Torch cutting through steel box section on a bench with sparks pouring off — Cutting the sections

Before / after

Drag it backto how we found it.

Drag the divider to see the change. Where a frame is marked Concept it illustrates the starting point rather than photographs it.

Illustration of bare cut steel sections clamped on the bench before welding — FabricationBare steel to welded panel

Fabricator welding the finished panel in place on site — FabricationBare steel to welded panel

Before you call

Ornamental ironwork
Drawn in-house
Cut and welded here
On-site welding
Two-leaf openings

Does custom mean a different scale of job?: Not necessarily. Where the opening is an odd width or the pier is not square, a made piece is often the only thing that fits at all.
Can ornamental ironwork be repaired?: Frequently — that is welding and dressing rather than replacement, and it happens on site where the piece is already fixed.
Can a two-leaf gate work on my frontage?: If the setback gives the leaves somewhere to open into, yes — that gets measured on site before anything is drawn.
Two leaves or one?: A pair halves the arc each leaf needs and doubles the hardware. Opening width and setback usually settle it between them.

Same county

The towns marked The north county share the same geography as Jupiter.