What does the county require?

Broward sits inside the High-Velocity Hurricane Zone, so wind rating is set by code. The permit itself is local, and an HOA architectural review often runs alongside it.

Is Broward the same as Miami-Dade?

For wind load, yes — both counties are inside the High-Velocity Hurricane Zone. For permitting, no: that is administered locally and it is not identical from city to city.

I have a sketch, not a drawing.

A sketch is enough to start. We draw it properly and show you the gate on your entrance.

Can you match something that already exists?

Yes — an existing panel, a neighbouring property's detail, or a piece of the house itself.

Custom Gate Fabrication in Wilton Manors, FL

Tall ornate iron gate with scrollwork between stone pillars and lanterns

Custom fabrication · Wilton Manors, FL

Drawn properly, then shown on your own entrance before a cut is made.

Get a quote

(954) 245-0182

Barrier arm lowered across the entry lane of a gated residential community. — Central Broward — The older inland grid either side of I-95 and the canal network that runs through it.

Wilton Manors · Broward County

Most custom gates begin as something drawn badly on a phone. That is genuinely enough. It gets turned into a real drawing, put on a photograph of your entrance, and changed there — where changes are free.

Tight urban openings are exactly where a gate gets made rather than bought — an odd width, an awkward pier, a wall that is not square to the road.

The urban grid was laid out long before anybody was automating an entrance, so the space a gate needs has to be found rather than assumed.

Also inside the HVHZ

Broward falls inside the same High-Velocity Hurricane Zone as Miami-Dade, so the wind rating carries across the county line unchanged. What does not carry across is the paperwork: permitting is administered locally, and the sensible order is to ask what Wilton Manors expects before the steel is ordered rather than after.

Custom & Welding — the full breakdown

Before / after

Drag it backto how we found it.

Drag the divider to see the change. Where a frame is marked Concept it illustrates the starting point rather than photographs it.

Illustration of bare cut steel sections clamped on the bench before welding — FabricationBare steel to welded panel

Fabricator welding the finished panel in place on site — FabricationBare steel to welded panel

Custom & Welding · Wilton Manors

05 frames

Gilded heraldic crest mounted on an ornamental iron gate

Crest, gilded

Torch cutting through steel box section on a bench with sparks pouring off — Cutting the sections

Angle grinder throwing a fan of sparks off a steel edge — Dressing the edge

Welding arc flaring as a bead is laid on a steel frame in a dark shop — The arc

Fabricator welding an aluminum picket fence panel in place on site — Welded on site

Worth knowing

Ornamental ironwork
Drawn in-house
Cut and welded here
On-site welding
Slide & cantilever options

What does the county require?: Broward sits inside the High-Velocity Hurricane Zone, so wind rating is set by code. The permit itself is local, and an HOA architectural review often runs alongside it.
Is Broward the same as Miami-Dade?: For wind load, yes — both counties are inside the High-Velocity Hurricane Zone. For permitting, no: that is administered locally and it is not identical from city to city.
I have a sketch, not a drawing.: A sketch is enough to start. We draw it properly and show you the gate on your entrance.
Can you match something that already exists?: Yes — an existing panel, a neighbouring property's detail, or a piece of the house itself.