I have a sketch, not a drawing.

A sketch is enough to start. We draw it properly and show you the gate on your entrance.

Can you match something that already exists?

Yes — an existing panel, a neighbouring property's detail, or a piece of the house itself.

Structural repair, not a new gate?

We weld on site. Posts, frames, hinges and rails get repaired where they stand.

Can you work from a photograph?

Yes. A photograph of the detail you want matched is usually more useful than a description of it.

Custom Ironwork & Gate Matching in Miami Springs, FL

Welding arc flaring as a bead is laid on a steel frame in a dark shop

Matching what exists · Miami Springs, FL

An existing panel, a neighbouring run, or a detail off the house itself.

Get a quote

(954) 245-0182

Black sliding gate running along a concrete driveway beside a clipped lawn and palms. — The urban core — Where the driveway usually meets the sidewalk and the swing arc has to come from somewhere else.

Miami Springs · Miami-Dade County

Half of custom work is not inventing anything. It is reproducing a picket profile, a scroll or a cap that already exists on the property so the new piece does not announce itself as new.

Tight urban openings are exactly where a gate gets made rather than bought — an odd width, an awkward pier, a wall that is not square to the road.

Where the property line meets a public sidewalk, everything the gate does has to happen inside the property.

Wind load first, paperwork second

The High-Velocity Hurricane Zone covers Miami-Dade in full, which is what decides the frame and the fixings long before anyone picks a finish. Approval is a separate, local question: in Miami Springs it runs through whichever authority has jurisdiction, and where a homeowners' association governs the street its architectural review usually runs alongside it.

Custom & Welding — the full breakdown

Before / after

Drag it backto how we found it.

Drag the divider to see the change. Where a frame is marked Concept it illustrates the starting point rather than photographs it.

Illustration of bare cut steel sections clamped on the bench before welding — FabricationBare steel to welded panel

Fabricator welding the finished panel in place on site — FabricationBare steel to welded panel

Custom & Welding · Miami Springs

05 frames

Tall ornate iron gate with scrollwork between stone pillars and lanterns

Scrollwork and lanterns

Torch cutting through steel box section on a bench with sparks pouring off — Cutting the sections

Angle grinder throwing a fan of sparks off a steel edge — Dressing the edge

Fabricator welding an aluminum picket fence panel in place on site — Welded on site

Sparks falling in front of a metal fence panel being worked on — Sparks off the panel

Straight answers

Ornamental ironwork
Drawn in-house
Cut and welded here
On-site welding
Slide & cantilever options

I have a sketch, not a drawing.: A sketch is enough to start. We draw it properly and show you the gate on your entrance.
Can you match something that already exists?: Yes — an existing panel, a neighbouring property's detail, or a piece of the house itself.
Structural repair, not a new gate?: We weld on site. Posts, frames, hinges and rails get repaired where they stand.
Can you work from a photograph?: Yes. A photograph of the detail you want matched is usually more useful than a description of it.