Skip to main content
Get a Quote
Sparks falling in front of a metal fence panel being worked on

In the shop · Lighthouse Point, FL

Designed, cut, welded and finished in-house, then hung by the people who built it.

Get a quote
(954) 245-0182
Aerial view of a coastal residential street, its rear gardens enclosed by hedging and fencing.
The coastal strip — The barrier island and the streets immediately behind it, from the county line up to the Hillsboro Inlet.

Lighthouse Point · Broward County

Cut list, jig, weld, dress, finish, hang. Keeping all six steps in one place is why a one-off is possible at all — nothing has to be ordered to a standard size, and the people who fabricated it are the people who hang it.

Ornamental work this close to the water is a materials conversation first. What gets drawn has to survive the exposure, which rules some sections and some finishes out before the design starts.

Spray carries further inland than people expect, which is why a finish specified here is not the one specified well away from the water.

Ask before the steel is ordered

Broward is inside the High-Velocity Hurricane Zone, so the wind rating is settled by code rather than by preference. What is not settled by code is the local review — Lighthouse Point handles that itself, and starting it early is the cheapest decision on the whole project.

Custom & Welding — the full breakdown

Custom & Welding · Lighthouse Point

06 frames
Tall ornate iron gate with scrollwork between stone pillars and lanterns

Scrollwork and lanterns

Torch cutting through steel box section on a bench with sparks pouring off
Cutting the sections
Angle grinder throwing a fan of sparks off a steel edge
Dressing the edge
Welding arc flaring as a bead is laid on a steel frame in a dark shop
The arc
Fabricator welding an aluminum picket fence panel in place on site
Welded on site
Gilded heraldic crest mounted on an ornamental iron gate
Crest, gilded

Before / after

Drag it backto how we found it.

Drag the divider to see the change. Where a frame is marked Concept it illustrates the starting point rather than photographs it.

Illustration of bare cut steel sections clamped on the bench before welding
Fabricator welding the finished panel in place on site
Concept · sample
FabricationBare steel to welded panel

No sales script

  • Ornamental ironwork
  • Drawn in-house
  • Cut and welded here
  • On-site welding
  • Specified for salt exposure
I have a sketch, not a drawing.
A sketch is enough to start. We draw it properly and show you the gate on your entrance.
Can you match something that already exists?
Yes — an existing panel, a neighbouring property's detail, or a piece of the house itself.
Structural repair, not a new gate?
We weld on site. Posts, frames, hinges and rails get repaired where they stand.
Can you work from a photograph?
Yes. A photograph of the detail you want matched is usually more useful than a description of it.

Nearby

The towns marked The coastal strip share the same geography as Lighthouse Point.

Every city in Broward County

Also in Lighthouse Point

Next step

The difficult entrances are the interesting ones. Tell us what makes yours in Lighthouse Point difficult and you will get a straight answer about what is possible.

Start the conversation
(954) 245-0182

Index

Everything else in Lighthouse Point — and everywhere else for custom & welding.

One page per trade per town. If this is the right town and the wrong trade, or the right trade and the wrong town, it is one click from here.

Every service in Lighthouse Point8 trades
Custom & Welding in every city we cover62 other towns

Miami-Dade County

Broward County

Palm Beach County

Marked towns sit in The coastal strip — the same group as Lighthouse Point on the Broward County page.

Wider area
Call NowGet a Quote