I have a sketch, not a drawing.

A sketch is enough to start. We draw it properly and show you the gate on your entrance.

Can you match something that already exists?

Yes — an existing panel, a neighbouring property's detail, or a piece of the house itself.

Structural repair, not a new gate?

We weld on site. Posts, frames, hinges and rails get repaired where they stand.

Can you work from a photograph?

Yes. A photograph of the detail you want matched is usually more useful than a description of it.

On-Site Welding & Structural Repair in Hallandale Beach, FL

Welding arc flaring as a bead is laid on a steel frame in a dark shop

On-site welding · Hallandale Beach, FL

Posts, frames, hinges and rails repaired in place rather than carted away.

Get a quote

(954) 245-0182

Aerial view of a coastal residential street, its rear gardens enclosed by hedging and fencing. — The coastal strip — The barrier island and the streets immediately behind it, from the county line up to the Hillsboro Inlet.

Hallandale Beach · Broward County

Not everything needs to become a new gate. A cracked hinge boss, a post that has moved, a rail that has torn away from its stile — those are structural repairs, and they happen on site with the gate still hanging.

Ornamental work this close to the water is a materials conversation first. What gets drawn has to survive the exposure, which rules some sections and some finishes out before the design starts.

Waterfront and inlet addresses frequently sit under a town or association design guideline of their own, on top of whatever the county requires.

One code, many counters

The wind-load requirement in Hallandale Beach is the High-Velocity Hurricane Zone standard that governs the whole of Broward. The review that sits on top of it is local, and in a county this dense with planned communities an association's architectural approval is frequently the longer of the two.

Custom & Welding — the full breakdown

Before / after

Drag it backto how we found it.

Drag the divider to see the change. Where a frame is marked Concept it illustrates the starting point rather than photographs it.

Illustration of bare cut steel sections clamped on the bench before welding — FabricationBare steel to welded panel

Fabricator welding the finished panel in place on site — FabricationBare steel to welded panel

Custom & Welding · Hallandale Beach

06 frames

Sparks falling in front of a metal fence panel being worked on

Sparks off the panel

Gilded heraldic crest mounted on an ornamental iron gate — Crest, gilded

Tall ornate iron gate with scrollwork between stone pillars and lanterns — Scrollwork and lanterns

Torch cutting through steel box section on a bench with sparks pouring off — Cutting the sections

Angle grinder throwing a fan of sparks off a steel edge — Dressing the edge

Fabricator welding an aluminum picket fence panel in place on site — Welded on site

Before you call

Ornamental ironwork
Drawn in-house
Cut and welded here
On-site welding
Specified for salt exposure

I have a sketch, not a drawing.: A sketch is enough to start. We draw it properly and show you the gate on your entrance.
Can you match something that already exists?: Yes — an existing panel, a neighbouring property's detail, or a piece of the house itself.
Structural repair, not a new gate?: We weld on site. Posts, frames, hinges and rails get repaired where they stand.
Can you work from a photograph?: Yes. A photograph of the detail you want matched is usually more useful than a description of it.