Can you work from a photograph?

Yes. A photograph of the detail you want matched is usually more useful than a description of it.

Does custom mean a different scale of job?

Not necessarily. Where the opening is an odd width or the pier is not square, a made piece is often the only thing that fits at all.

Can ornamental ironwork be repaired?

Frequently — that is welding and dressing rather than replacement, and it happens on site where the piece is already fixed.

The gate is nowhere near a power supply.

That is a normal starting point. Solar, battery and trenched runs are all real options, and the site decides between them.

Custom Gate Fabrication in Palm Springs, FL

Gilded heraldic crest mounted on an ornamental iron gate

Custom fabrication · Palm Springs, FL

Drawn properly, then shown on your own entrance before a cut is made.

Get a quote

(954) 245-0182

Custom & Welding · Palm Springs

06 frames

Sparks falling in front of a metal fence panel being worked on

Sparks off the panel

Tall ornate iron gate with scrollwork between stone pillars and lanterns — Scrollwork and lanterns

Torch cutting through steel box section on a bench with sparks pouring off — Cutting the sections

Angle grinder throwing a fan of sparks off a steel edge — Dressing the edge

Welding arc flaring as a bead is laid on a steel frame in a dark shop — The arc

Fabricator welding an aluminum picket fence panel in place on site — Welded on site

Horizontal timber slat gate between stucco piers, under flowering bougainvillea. — Inland & equestrian — West of the turnpike the county turns to paddocks and service roads, and a gate is sized around a truck and trailer.

Palm Springs · Palm Beach County

Most custom gates begin as something drawn badly on a phone. That is genuinely enough. It gets turned into a real drawing, put on a photograph of your entrance, and changed there — where changes are free.

Out here it is as often structural welding as ornament: posts, frames, hinges and rails repaired where they stand rather than carted back to a shop.

Where lots are measured in acres, the gate is often the only structure between the road and the house.

Different county, different approval route

Because Palm Beach is outside the High-Velocity Hurricane Zone, the approvals a Miami-Dade contractor quotes from memory are the wrong ones here. What Palm Springs actually requires is set locally, and where a town or an association runs its own design guidelines those shape the finish as much as the code shapes the frame.

Custom & Welding — the full breakdown

Before / after

Drag it backto how we found it.

Drag the divider to see the change. Where a frame is marked Concept it illustrates the starting point rather than photographs it.

Illustration of bare cut steel sections clamped on the bench before welding — FabricationBare steel to welded panel

Fabricator welding the finished panel in place on site — FabricationBare steel to welded panel

Worth knowing

Drawn in-house
Cut and welded here
On-site welding
Ornamental ironwork
Solar & battery options

Can you work from a photograph?: Yes. A photograph of the detail you want matched is usually more useful than a description of it.
Does custom mean a different scale of job?: Not necessarily. Where the opening is an odd width or the pier is not square, a made piece is often the only thing that fits at all.
Can ornamental ironwork be repaired?: Frequently — that is welding and dressing rather than replacement, and it happens on site where the piece is already fixed.
The gate is nowhere near a power supply.: That is a normal starting point. Solar, battery and trenched runs are all real options, and the site decides between them.