Skip to main content
Black horizontal louvre slats silhouetted against water at sunset

Fencing & enclosures · Palm Springs, FL

The fence is drawn from the same detail as the gate, so the line carries.

Horizontal timber slat gate between stucco piers, under flowering bougainvillea.
Inland & equestrianWest of the turnpike the county turns to paddocks and service roads, and a gate is sized around a truck and trailer.

Palm Springs · Palm Beach County

A gate that does not match its fence reads as two purchases. Picket spacing, rail height, cap detail and finish all come off the same drawing, which is the difference between a boundary and a collection of panels.

Acreage boundaries run over ground that moves. Panels get racked or stepped to the grade so the top line stays deliberate instead of wandering.

Where lots are measured in acres, the gate is often the only structure between the road and the house.

Outside the HVHZ — a different set of paperwork

Palm Beach County sits outside the High-Velocity Hurricane Zone that governs Miami-Dade and Broward. Wind still decides the frame here; the product-approval paperwork is simply a different set. Permitting in Palm Springs is administered locally, so confirm what is expected before fabrication starts.

Fencing · Palm Springs

05 frames
Close view of cast spear-top finials on a black ornamental iron fence

Spear-top finials

Aluminum picket fence running along a planted boundaryConcept
Aluminum picket run
Horizontal slat gate and fence at the side of a modern rendered house
Slat, side return
Ornamental iron fence running behind a clipped hedge under a line of palmsConcept
Iron behind hedge
Timber-look horizontal slat fence running along a path with planting behindConcept
Horizontal timber-look

Worth knowing

  • Matched to the gate
  • Aluminum or steel
  • Ornamental estate
  • Set to the grade
  • Solar & battery options
Aluminum or steel?
Aluminum will not rust and suits long boundary runs. Steel takes ornamental work. The site usually decides.
My ground is not level.
Panels are racked or stepped to the grade so the top line stays deliberate instead of wandering.
Can you match a fence that is already there?
Usually. Picket profile, rail height and spacing get measured off the existing run rather than guessed from a photograph.
How deep do the posts go?
Deep enough for the panel height and for the ground it is going into. That is a calculation, not a habit.

Next step

Describe the gate and where it is in Palm Springs, and you will get an answer from someone who works on them rather than a call-centre script.

Call NowGet a Quote