My ground is not level.

Panels are racked or stepped to the grade so the top line stays deliberate instead of wandering.

Can you match a fence that is already there?

Usually. Picket profile, rail height and spacing get measured off the existing run rather than guessed from a photograph.

How deep do the posts go?

Deep enough for the panel height and for the ground it is going into. That is a calculation, not a habit.

Do I need a pedestrian gate in the run?

One somewhere sensible is the thing nobody regrets and plenty of people come back to add later.

Fencing & Enclosures in Bal Harbour, FL

Close view of cast spear-top finials on a black ornamental iron fence

Fencing & enclosures · Bal Harbour, FL

The fence is drawn from the same detail as the gate, so the line carries.

Get a quote

(954) 245-0182

Waterfront estate seen from the water, its lawn lined with tall palms above a seawall. — The barrier islands — Ocean on one side, the bay on the other, and nothing in between to break the salt.

Bal Harbour · Miami-Dade County

A gate that does not match its fence reads as two purchases. Picket spacing, rail height, cap detail and finish all come off the same drawing, which is the difference between a boundary and a collection of panels.

Aluminum does not rust, which is most of the argument on a boundary this close to the water. Steel takes the ornamental work, but the coating has to be specified for the exposure.

Everything within a few blocks of open water runs on the same clock: salt reaches fixings, hinges and enclosures whether or not the house faces the ocean.

Inside the High-Velocity Hurricane Zone

Miami-Dade sits inside the Florida Building Code's High-Velocity Hurricane Zone, the strictest wind-load regime in the state, so the rating on posts, panels and hardware is not a nice-to-have here. Permits on top of that are issued locally — by the municipality or by the county — so what Bal Harbour wants to see on paper is worth confirming before anything is cut.

Fencing — the full breakdown

Fencing · Bal Harbour

06 frames

Ornamental iron fence running behind a clipped hedge under a line of palms

Iron behind hedge · concept scene

Timber-look horizontal slat fence running along a path with planting behind — Horizontal timber-look

Black slat gate set into a wall of climbing greenery at a modern entrance — Slat into greenery

Black horizontal louvre slats silhouetted against water at sunset — Louvre, backlit

Aluminum picket fence running along a planted boundary — Aluminum picket run

Horizontal slat gate and fence at the side of a modern rendered house — Slat, side return

Worth knowing

Set to the grade
Matched to the gate
Aluminum or steel
Ornamental estate
Specified for salt exposure

My ground is not level.: Panels are racked or stepped to the grade so the top line stays deliberate instead of wandering.
Can you match a fence that is already there?: Usually. Picket profile, rail height and spacing get measured off the existing run rather than guessed from a photograph.
How deep do the posts go?: Deep enough for the panel height and for the ground it is going into. That is a calculation, not a habit.
Do I need a pedestrian gate in the run?: One somewhere sensible is the thing nobody regrets and plenty of people come back to add later.