Does it work with the gate I already have?

Access control talks to the operator, so in most cases it bolts onto what is already there.

Can it work with a camera?

Many entry stations include one or integrate with a system you already have. Worth deciding before the pedestal is set, not after.

What happens if the internet drops?

Codes and tags keep working locally. It is the remote management that pauses, not the gate.

Where should the pedestal go?

Far enough back that a car is clear of the road, and at a height a driver can reach without opening the door.

Keypad & RFID Access Control in Bal Harbour, FL

Weatherproof steel keypad fixed to a concrete entry wall

Permissions · Bal Harbour, FL

Per-person codes and tags, revoked individually without changing anyone else's.

Get a quote

(954) 245-0182

Waterfront estate seen from the water, its lawn lined with tall palms above a seawall. — The barrier islands — Ocean on one side, the bay on the other, and nothing in between to break the salt.

Bal Harbour · Miami-Dade County

One shared code is one code that eventually everybody knows. Per-person codes and tags mean the cleaner, the pool service and your brother-in-law each have their own, and pulling one does not inconvenience the other two.

Waterfront addresses tend to run household, guest and trade access through one entry, which is the exact case telephone entry and per-person codes were built for.

Waterfront and inlet addresses frequently sit under a town or association design guideline of their own, on top of whatever the county requires.

Two approvals, not one

Anything structural at the property line in Miami-Dade answers to the High-Velocity Hurricane Zone standard, and that is what sets the frame and the fixings. Separately, Bal Harbour runs a local review, and where a homeowners' association governs the street it generally runs one of its own. Neither is a thing to discover after fabrication.

Access Control — the full breakdown

Before / after

Drag it backto how we found it.

Same job, same angle. Nothing staged between the two frames.

Bare entry post set in the ground with materials on the driveway around it — Telephone entryBare post to callbox

The finished intercom and callbox post beside the gated driveway — Telephone entryBare post to callbox

RFID reader post part-installed between bollards with the wiring still open — RFIDReader in at the lane

The finished RFID reader mounted and closed up on the same post — RFIDReader in at the lane

Access Control · Bal Harbour

04 frames

Keypad with an integrated card reader mounted on a blue entry pedestal

Keypad plus reader

Finished intercom and callbox post beside a gated driveway entrance — Post finished

RFID reader mounted on a post between bollards at a vehicle entrance — RFID at the lane

Callbox on a gooseneck post standing on the verge beside a driveway and fence — Callbox on a gooseneck

Before you call

Callbox to your phone
RFID tags
Permissions you control
Keypad & code
Specified for salt exposure

Does it work with the gate I already have?: Access control talks to the operator, so in most cases it bolts onto what is already there.
Can it work with a camera?: Many entry stations include one or integrate with a system you already have. Worth deciding before the pedestal is set, not after.
What happens if the internet drops?: Codes and tags keep working locally. It is the remote management that pauses, not the gate.
Where should the pedestal go?: Far enough back that a car is clear of the road, and at a height a driver can reach without opening the door.