Skip to main content
Rusted and padlocked iron gate bars seized shut with a corroded latch

Gate repair

Off-track, dead motor, snapped chain, bent frame, failed sensor.

Gate Repair

08 frames
Technician working on an ornate iron gate at a residential entrance

On the gate

Newly laid ground track running along a street where a sliding gate rolls
Track relaid
Chain drive and worn hardware exposed alongside an overgrown sliding gate rail
Chain drive stripped
Open gate operator control box with the board out and test gear laid on the ground
Board out, meter on
Sagging white gate frame swallowed by ivy at a brick garden entrance
Sagged and overgrown
Weathered timber gate with split boards leaning against a chain-link fence
Split and weathered
Rusted-through metal gate panel with peeling paint and a broken bottom rail
Rusted through
Old iron and timber side gate hanging out of square beside a house
Out of square

What's it doing?

Pick the symptom and the repair behind it comes up.

Open gate operator control box with the board out and test gear laid on the ground
Fault 01Control board
Operator control board wired in its cabinet with the door open on site

Fault 01 / 06

Press it and nothing moves at all.It is the supply, the board or the motor. A meter says which; guessing replaces the wrong one.

Checked on site

  • Supply
  • Board
  • Motor
  • Wiring

Before / after

Drag it backto how we found it.

Same job, same angle. Nothing staged between the two frames.

Corroded gate operator caked in oil and grime after years of coastal salt exposure
Clean replacement gate operator installed in the same housing
Same-day repairSeized operator, replaced
Sagging white gate frame swallowed by ivy at a brick garden entrance

Straight answers

What people askbefore they book.

  • Every brand
  • Diagnose on site
  • Parts on the truck
  • Re-tuned before we leave
You didn't install it — will you still touch it?
Yes. We service every major operator brand, whoever put it in.
Repair or replace?
We diagnose first and tell you which is worth doing. Sometimes it is one part.
My gate is stuck shut right now.
We can get it moving and secure on the visit, then come back for the permanent fix if parts are needed.

Next step

It starts witha drawing.

On-site consults across South Florida. You see the gate on your own entrance before you commit to anything.

Call NowGet a QuoteEspañol