A pair halves the arc each leaf needs and doubles the hardware. Opening width and setback usually settle it between them.

Do I need a permit for this?

Often, and Miami-Dade is inside the High-Velocity Hurricane Zone, so the wind rating matters too. Permits are issued locally, so we confirm what your authority wants before we start.

The High-Velocity Hurricane Zone — the Florida Building Code's strictest wind-load region. It covers all of Miami-Dade, which is why the hardware spec here is not the spec further north.

Will it match the gate?

The fence is drawn from the same detail as the gate, so the picket, the rail and the finish line up.

Aluminum & Steel Fencing in Pinecrest, FL

Timber-look horizontal slat fence running along a path with planting behind

Concept · illustrative

Aluminum or steel · Pinecrest, FL

One will not rust. The other takes ornamental work. The site usually decides.

Get a quote

(954) 245-0182

Technician working at the control post of a tall ornamental iron gate in front of a palm-lined house. — The estate belt — Deeper setbacks and mature canopy south-west of the city — the openings with room for a two-leaf gate.

Pinecrest · Miami-Dade County

Aluminum is the low-maintenance answer for long runs and exposed boundaries. Steel is what you want when the fence has real ornamental detail in it. Neither is the right answer everywhere, which is why the site gets looked at first.

Long frontage is where a matched fence earns its keep — the same picket, the same rail height and the same finish as the gate, carried the whole length of the boundary.

Mature canopy is the reason these streets look the way they do, and it is also a maintenance factor — leaves, roots and shade all reach the gate line eventually.

Wind load first, paperwork second

The High-Velocity Hurricane Zone covers Miami-Dade in full, which is what decides the frame and the fixings long before anyone picks a finish. Approval is a separate, local question: in Pinecrest it runs through whichever authority has jurisdiction, and where a homeowners' association governs the street its architectural review usually runs alongside it.

Fencing — the full breakdown

Fencing · Pinecrest

06 frames

Ornamental iron fence running behind a clipped hedge under a line of palms

Iron behind hedge · concept scene

Black slat gate set into a wall of climbing greenery at a modern entrance — Slat into greenery

Close view of cast spear-top finials on a black ornamental iron fence — Spear-top finials

Black horizontal louvre slats silhouetted against water at sunset — Louvre, backlit

Aluminum picket fence running along a planted boundary — Aluminum picket run

Horizontal slat gate and fence at the side of a modern rendered house — Slat, side return

Straight answers

Matched to the gate
Aluminum or steel
Ornamental estate
Set to the grade
Two-leaf openings

Two leaves or one?: A pair halves the arc each leaf needs and doubles the hardware. Opening width and setback usually settle it between them.
Do I need a permit for this?: Often, and Miami-Dade is inside the High-Velocity Hurricane Zone, so the wind rating matters too. Permits are issued locally, so we confirm what your authority wants before we start.
What is the HVHZ?: The High-Velocity Hurricane Zone — the Florida Building Code's strictest wind-load region. It covers all of Miami-Dade, which is why the hardware spec here is not the spec further north.
Will it match the gate?: The fence is drawn from the same detail as the gate, so the picket, the rail and the finish line up.