Not necessarily. Posts, piers and rendered pillars are three different structures, and the leaf and the ground decide which one is right.

Can a two-leaf gate work on my frontage?

If the setback gives the leaves somewhere to open into, yes — that gets measured on site before anything is drawn.

A pair halves the arc each leaf needs and doubles the hardware. Opening width and setback usually settle it between them.

Do I need a permit for this?

Often, and Miami-Dade is inside the High-Velocity Hurricane Zone, so the wind rating matters too. Permits are issued locally, so we confirm what your authority wants before we start.

Driveway Gate Design & Installation in Pinecrest, FL

Black metal driveway gate and matching fence across the entrance of a South Florida property

The entrance · Pinecrest, FL

Drawn, fabricated and hung so the entrance reads as one piece of work.

Get a quote

(954) 245-0182

Driveway Gates · Pinecrest

06 frames

Horizontal timber slat gate between brick pillars under flowering bougainvillea

Horizontal slat, brick piers

Wide driveway gate and railing photographed at dusk from the street — Dusk, from the street

Lit driveway gate at night with uplit palms behind it — After dark

Ornate arched iron double gate between rendered pillars at an estate entrance — Ornate double swing

Sun setting through the vertical slats of a dark metal gate — Vertical slat, low sun

Black swing gate open onto a paver driveway with a lawn either side — Swing pair on pavers

Technician working at the control post of a tall ornamental iron gate in front of a palm-lined house. — The estate belt — Deeper setbacks and mature canopy south-west of the city — the openings with room for a two-leaf gate.

Pinecrest · Miami-Dade County

A gate is the only part of a property everyone sees and nobody walks past quickly. Piers, gate, fence line and the light on it either belong to each other or obviously do not, so they get drawn together rather than bought separately.

Deeper setbacks are what make a two-leaf ornamental pair worth fabricating at all: there is room for the leaves to open into the property instead of out over the footpath.

Where the house sits well back, the gate is the only part of the property most people ever see close up.

Wind load first, paperwork second

The High-Velocity Hurricane Zone covers Miami-Dade in full, which is what decides the frame and the fixings long before anyone picks a finish. Approval is a separate, local question: in Pinecrest it runs through whichever authority has jurisdiction, and where a homeowners' association governs the street its architectural review usually runs alongside it.

Driveway Gates — the full breakdown

Before / after

Drag it backto how we found it.

Drag the divider to see the change. Where a frame is marked Concept it illustrates the starting point rather than photographs it.

Illustration of a plain builder-grade gate shown on the same driveway — DesignBuilder-grade to bespoke

The ornate custom estate gate built on that driveway — DesignBuilder-grade to bespoke

No sales script

Shop-fabricated
Coastal finish
On-site measure
Drawn before it's cut
Two-leaf openings

Do I need pillars?: Not necessarily. Posts, piers and rendered pillars are three different structures, and the leaf and the ground decide which one is right.
Can a two-leaf gate work on my frontage?: If the setback gives the leaves somewhere to open into, yes — that gets measured on site before anything is drawn.
Two leaves or one?: A pair halves the arc each leaf needs and doubles the hardware. Opening width and setback usually settle it between them.
Do I need a permit for this?: Often, and Miami-Dade is inside the High-Velocity Hurricane Zone, so the wind rating matters too. Permits are issued locally, so we confirm what your authority wants before we start.