Skip to main content
Black swing gate open onto a paver driveway with a lawn either side

Driveway gates · Davie, FL

Measured on site and drawn on your entrance before anything is cut.

Low sun raking through the vertical slats of a dark timber gate at the end of the day.
The western tierAcreage and horse property against the Everglades boundary — long drives, gates far from the house.

Davie · Broward County

The first question is never the style, it is the opening. Width, slope, where the cars stop and how much room the leaves have to move through decide what can be built, and all four get measured rather than assumed.

A gate set well back on a long drive is a different brief — a wider clear opening for a truck and trailer, longer cable runs, and a leaf that has to stay square with no wall to lean on.

Where lots are measured in acres, the gate is often the only structure between the road and the house.

One code, many counters

The wind-load requirement in Davie is the High-Velocity Hurricane Zone standard that governs the whole of Broward. The review that sits on top of it is local, and in a county this dense with planned communities an association's architectural approval is frequently the longer of the two.

Driveway Gates · Davie

06 frames
Sun setting through the vertical slats of a dark metal gate

Vertical slat, low sun

Black sliding driveway gate beside a stone pillar with palms behind
Slide, single leaf
Horizontal timber slat gate between brick pillars under flowering bougainvillea
Horizontal slat, brick piers
Wide driveway gate and railing photographed at dusk from the street
Dusk, from the street
Lit driveway gate at night with uplit palms behind it
After dark
Ornate arched iron double gate between rendered pillars at an estate entrance
Ornate double swing

Before / after

Drag it backto how we found it.

Drag the divider to see the change. Where a frame is marked Concept it illustrates the starting point rather than photographs it.

Illustration of a plain builder-grade gate shown on the same driveway
The ornate custom estate gate built on that driveway
Concept · sample
DesignBuilder-grade to bespoke

Worth knowing

  • Drawn before it's cut
  • Shop-fabricated
  • Coastal finish
  • On-site measure
  • Solar & battery options
Will it actually fit my driveway?
We measure on site and draw the gate on your entrance before anything is cut.
Swing or slide — which one?
Slope, curb space and where you park decide it. We tell you what the driveway allows.
How does it hold up here?
Salt and sun are the design brief in South Florida, so material and finish are specified for the coast.
Can I see it before it's built?
Yes. It gets drawn onto a photograph of your entrance, and the changes happen there rather than in the shop.

Next step

Send a photograph of the entrance and roughly what you want it to do. That is enough to start a real conversation.

Call NowGet a Quote