Skip to main content
Ornamental iron fence running behind a clipped hedge under a line of palms
Concept · illustrative

Set to the grade · Davie, FL

Panels racked or stepped to the ground so the run stays deliberate.

Low sun raking through the vertical slats of a dark timber gate at the end of the day.
The western tierAcreage and horse property against the Everglades boundary — long drives, gates far from the house.

Davie · Broward County

Ground is rarely level and a fence set as if it were shows it immediately. Panels are either racked to follow the slope or stepped in clean increments — both are decisions, and the wrong one is visible from the road.

Acreage boundaries run over ground that moves. Panels get racked or stepped to the grade so the top line stays deliberate instead of wandering.

Ground that carries trucks, trailers and equipment moves under load, and anything set into it has to tolerate that.

Also inside the HVHZ

Broward falls inside the same High-Velocity Hurricane Zone as Miami-Dade, so the wind rating carries across the county line unchanged. What does not carry across is the paperwork: permitting is administered locally, and the sensible order is to ask what Davie expects before the steel is ordered rather than after.

Fencing · Davie

05 frames
Black slat gate set into a wall of climbing greenery at a modern entrance

Slat into greenery

Close view of cast spear-top finials on a black ornamental iron fence
Spear-top finials
Black horizontal louvre slats silhouetted against water at sunset
Louvre, backlit
Aluminum picket fence running along a planted boundaryConcept
Aluminum picket run
Horizontal slat gate and fence at the side of a modern rendered house
Slat, side return

Before you call

  • Set to the grade
  • Matched to the gate
  • Aluminum or steel
  • Ornamental estate
  • Solar & battery options
My ground is not level.
Panels are racked or stepped to the grade so the top line stays deliberate instead of wandering.
Can you match a fence that is already there?
Usually. Picket profile, rail height and spacing get measured off the existing run rather than guessed from a photograph.
How deep do the posts go?
Deep enough for the panel height and for the ground it is going into. That is a calculation, not a habit.
Do I need a pedestrian gate in the run?
One somewhere sensible is the thing nobody regrets and plenty of people come back to add later.

Next step

Send a photograph of the entrance and roughly what you want it to do. That is enough to start a real conversation.

Call NowGet a Quote