Why is the spec different up here?

Palm Beach County sits outside the High-Velocity Hurricane Zone that governs Miami-Dade and Broward, so the approval route the counties south of it use is the wrong one.

Will it match the gate?

The fence is drawn from the same detail as the gate, so the picket, the rail and the finish line up.

Aluminum will not rust and suits long boundary runs. Steel takes ornamental work. The site usually decides.

My ground is not level.

Panels are racked or stepped to the grade so the top line stays deliberate instead of wandering.

Fence Installation in Boynton Beach, FL

Long run of ornamental iron fencing with spear-top pickets beside a planted border

Set to the grade · Boynton Beach, FL

Panels racked or stepped to the ground so the run stays deliberate.

Get a quote

(954) 245-0182

Black double swing gate open onto a paver driveway lined with clipped hedging. — The south county cities — The densest run of gated communities anywhere in the three counties.

Boynton Beach · Palm Beach County

Ground is rarely level and a fence set as if it were shows it immediately. Panels are either racked to follow the slope or stepped in clean increments — both are decisions, and the wrong one is visible from the road.

Fencing inside a planned community usually has to meet a line that already exists, so the detail comes off the neighbouring run rather than out of a catalog.

Where an association governs the street, its architectural review usually runs in parallel with the municipal permit rather than after it.

Different county, different approval route

Because Palm Beach is outside the High-Velocity Hurricane Zone, the approvals a Miami-Dade contractor quotes from memory are the wrong ones here. What Boynton Beach actually requires is set locally, and where a town or an association runs its own design guidelines those shape the finish as much as the code shapes the frame.

Fencing — the full breakdown

Fencing · Boynton Beach

06 frames

Spear-top finials

Black horizontal louvre slats silhouetted against water at sunset — Louvre, backlit

Aluminum picket fence running along a planted boundary — Aluminum picket run

Horizontal slat gate and fence at the side of a modern rendered house — Slat, side return

Ornamental iron fence running behind a clipped hedge under a line of palms — Iron behind hedge

Timber-look horizontal slat fence running along a path with planting behind — Horizontal timber-look

Before you call

Ornamental estate
Set to the grade
Matched to the gate
Aluminum or steel
Shared-entry duty cycle

Why is the spec different up here?: Palm Beach County sits outside the High-Velocity Hurricane Zone that governs Miami-Dade and Broward, so the approval route the counties south of it use is the wrong one.
Will it match the gate?: The fence is drawn from the same detail as the gate, so the picket, the rail and the finish line up.
Aluminum or steel?: Aluminum will not rust and suits long boundary runs. Steel takes ornamental work. The site usually decides.
My ground is not level.: Panels are racked or stepped to the grade so the top line stays deliberate instead of wandering.