Aluminum will not rust and suits long boundary runs. Steel takes ornamental work. The site usually decides.

My ground is not level.

Panels are racked or stepped to the grade so the top line stays deliberate instead of wandering.

Can you match a fence that is already there?

Usually. Picket profile, rail height and spacing get measured off the existing run rather than guessed from a photograph.

How deep do the posts go?

Deep enough for the panel height and for the ground it is going into. That is a calculation, not a habit.

Aluminum & Steel Fencing in Golden Beach, FL

Black horizontal louvre slats silhouetted against water at sunset

Aluminum or steel · Golden Beach, FL

One will not rust. The other takes ornamental work. The site usually decides.

Get a quote

(954) 245-0182

Waterfront estate seen from the water, its lawn lined with tall palms above a seawall. — The barrier islands — Ocean on one side, the bay on the other, and nothing in between to break the salt.

Golden Beach · Miami-Dade County

Aluminum is the low-maintenance answer for long runs and exposed boundaries. Steel is what you want when the fence has real ornamental detail in it. Neither is the right answer everywhere, which is why the site gets looked at first.

Aluminum does not rust, which is most of the argument on a boundary this close to the water. Steel takes the ornamental work, but the coating has to be specified for the exposure.

Wind exposure on the water is not only a number in a code table — it is what actually loads a gate leaf, every afternoon.

Wind load first, paperwork second

The High-Velocity Hurricane Zone covers Miami-Dade in full, which is what decides the frame and the fixings long before anyone picks a finish. Approval is a separate, local question: in Golden Beach it runs through whichever authority has jurisdiction, and where a homeowners' association governs the street its architectural review usually runs alongside it.

Fencing — the full breakdown

Fencing · Golden Beach

05 frames

Horizontal slat gate and fence at the side of a modern rendered house

Slat, side return

Ornamental iron fence running behind a clipped hedge under a line of palms — Iron behind hedge

Timber-look horizontal slat fence running along a path with planting behind — Horizontal timber-look

Black slat gate set into a wall of climbing greenery at a modern entrance — Slat into greenery

Close view of cast spear-top finials on a black ornamental iron fence — Spear-top finials

Straight answers

Matched to the gate
Aluminum or steel
Ornamental estate
Set to the grade
Specified for salt exposure

Aluminum or steel?: Aluminum will not rust and suits long boundary runs. Steel takes ornamental work. The site usually decides.
My ground is not level.: Panels are racked or stepped to the grade so the top line stays deliberate instead of wandering.
Can you match a fence that is already there?: Usually. Picket profile, rail height and spacing get measured off the existing run rather than guessed from a photograph.
How deep do the posts go?: Deep enough for the panel height and for the ground it is going into. That is a calculation, not a habit.

Same county

The towns marked The barrier islands share the same geography as Golden Beach.