Skip to main content
Aluminum picket fence running along a planted boundary
Concept · illustrative

Set to the grade · Juno Beach, FL

Panels racked or stepped to the ground so the run stays deliberate.

Fencing · Juno Beach

05 frames
Black slat gate set into a wall of climbing greenery at a modern entrance

Slat into greenery

Close view of cast spear-top finials on a black ornamental iron fence
Spear-top finials
Black horizontal louvre slats silhouetted against water at sunset
Louvre, backlit
Horizontal slat gate and fence at the side of a modern rendered house
Slat, side return
Ornamental iron fence running behind a clipped hedge under a line of palmsConcept
Iron behind hedge
Ornamental iron gate lit from below at night, palms above it against a dark sky.
On the waterBarrier-island and inlet addresses, most of them with a town or association design guideline of their own.

Juno Beach · Palm Beach County

Ground is rarely level and a fence set as if it were shows it immediately. Panels are either racked to follow the slope or stepped in clean increments — both are decisions, and the wrong one is visible from the road.

Aluminum does not rust, which is most of the argument on a boundary this close to the water. Steel takes the ornamental work, but the coating has to be specified for the exposure.

Waterfront and inlet addresses frequently sit under a town or association design guideline of their own, on top of whatever the county requires.

The coastal towns add a layer

Palm Beach County sits outside the High-Velocity Hurricane Zone, so the product approvals differ from the two counties to the south. On top of that, several towns and associations in this county run design guidelines of their own — so what Juno Beach expects is worth reading before a finish is chosen, not after.

Before you call

  • Set to the grade
  • Matched to the gate
  • Aluminum or steel
  • Ornamental estate
  • Specified for salt exposure
My ground is not level.
Panels are racked or stepped to the grade so the top line stays deliberate instead of wandering.
Can you match a fence that is already there?
Usually. Picket profile, rail height and spacing get measured off the existing run rather than guessed from a photograph.
How deep do the posts go?
Deep enough for the panel height and for the ground it is going into. That is a calculation, not a habit.
Do I need a pedestrian gate in the run?
One somewhere sensible is the thing nobody regrets and plenty of people come back to add later.

Next step

Describe the gate and where it is in Juno Beach, and you will get an answer from someone who works on them rather than a call-centre script.

Call NowGet a Quote