Skip to main content
Get a Quote
Horizontal timber slat gate between brick pillars under flowering bougainvillea

Swing, slide, cantilever · Dania Beach, FL

Your slope, your curb and your parking decide which one you can actually have.

Get a quote
(954) 245-0182

Driveway Gates · Dania Beach

06 frames
Lit driveway gate at night with uplit palms behind it

After dark

Ornate arched iron double gate between rendered pillars at an estate entrance
Ornate double swing
Sun setting through the vertical slats of a dark metal gate
Vertical slat, low sun
Black swing gate open onto a paver driveway with a lawn either side
Swing pair on pavers
Black sliding driveway gate beside a stone pillar with palms behind
Slide, single leaf
Wide driveway gate and railing photographed at dusk from the street
Dusk, from the street
Aerial view of a coastal residential street, its rear gardens enclosed by hedging and fencing.
The coastal strip — The barrier island and the streets immediately behind it, from the county line up to the Hillsboro Inlet.

Dania Beach · Broward County

A swing pair needs an arc. A slide needs a run alongside the opening. A cantilever needs neither but wants a counterbalance behind the post. Which of the three your driveway allows is a geometry question with one right answer, and it is worth settling early.

Close to open water the gate lives in salt air, so material and coating get specified before styling does — aluminum, or steel that is coated for the exposure rather than for the showroom.

Wind exposure on the water is not only a number in a code table — it is what actually loads a gate leaf, every afternoon.

One code, many counters

The wind-load requirement in Dania Beach is the High-Velocity Hurricane Zone standard that governs the whole of Broward. The review that sits on top of it is local, and in a county this dense with planned communities an association's architectural approval is frequently the longer of the two.

Driveway Gates — the full breakdown

Before / after

Drag it backto how we found it.

Drag the divider to see the change. Where a frame is marked Concept it illustrates the starting point rather than photographs it.

Illustration of a plain builder-grade gate shown on the same driveway
The ornate custom estate gate built on that driveway
Concept · sample
DesignBuilder-grade to bespoke

Straight answers

  • Coastal finish
  • On-site measure
  • Drawn before it's cut
  • Shop-fabricated
  • Specified for salt exposure
Will it actually fit my driveway?
We measure on site and draw the gate on your entrance before anything is cut.
Swing or slide — which one?
Slope, curb space and where you park decide it. We tell you what the driveway allows.
How does it hold up here?
Salt and sun are the design brief in South Florida, so material and finish are specified for the coast.
Can I see it before it's built?
Yes. It gets drawn onto a photograph of your entrance, and the changes happen there rather than in the shop.

Also in Dania Beach

Same county

The towns marked The coastal strip share the same geography as Dania Beach.

Every city in Broward County

Next step

The difficult entrances are the interesting ones. Tell us what makes yours in Dania Beach difficult and you will get a straight answer about what is possible.

Start the conversation
(954) 245-0182

Index

Everything else in Dania Beach — and everywhere else for driveway gates.

One page per trade per town. If this is the right town and the wrong trade, or the right trade and the wrong town, it is one click from here.

Every service in Dania Beach8 trades
Driveway Gates in every city we cover62 other towns

Miami-Dade County

Broward County

Palm Beach County

Marked towns sit in The coastal strip — the same group as Dania Beach on the Broward County page.

Wider area
Call NowGet a Quote