Can my existing gate be automated?

Often yes. The frame has to carry the operator, so we check hinges, posts and weight first.

What happens in a power cut?

Every install gets a manual release, and battery or solar backup where the site suits it.

Is it safe around kids and pets?

Photo-eyes and edge sensors stop and reverse the gate. They are commissioned, not just fitted.

Can I still open it by hand?

Every install gets a manual release, and where it goes is part of the job — it has to be findable in the dark.

Automatic Gate Systems in Jupiter, FL

Black automated sliding gate with an entry post standing open at a residential driveway

Safety and backup · Jupiter, FL

Photo-eyes, edge sensors and a manual release on every install.

Get a quote

(954) 245-0182

Grey perforated-panel modern gate across a driveway beneath a cantilevered house overhang. — The north county — From the city up to the Loxahatchee — newer construction, wider frontages, more slide gates than swings.

Jupiter · Palm Beach County

Two things separate a commissioned gate from a fitted one. The detection actually stops and reverses the leaf, tested rather than assumed. And there is a manual release you can find in the dark, with battery or solar backup where the site suits it.

A long approach and two heavy leaves is where photo-eyes and an edge sensor are doing real work rather than ticking a box — there is enough travel for something to be standing in it.

Wider frontages tend to favour a slide or a long swing pair, and both want the ground under them prepared properly.

Outside the HVHZ — a different set of paperwork

Palm Beach County sits outside the High-Velocity Hurricane Zone that governs Miami-Dade and Broward. Wind still decides the frame here; the product-approval paperwork is simply a different set. Permitting in Jupiter is administered locally, so confirm what is expected before fabrication starts.

Automatic Gates — the full breakdown

Before / after

Drag it backto how we found it.

Same job, same angle. Nothing staged between the two frames.

Technician marking a driveway beside a concrete saw before the safety loop is cut — Safety loopCut, laid, sealed, gone

Technician sealing the finished underground loop cut in the same restored driveway — Safety loopCut, laid, sealed, gone

Automatic Gates · Jupiter

06 frames

Ram-arm operator fitted to the hinge post of a light aluminum swing gate

Ram arm, swing leaf · concept scene

Technician sealing a finished underground safety loop cut in a driveway — Loop sealed in

Lit modern house at dusk with vehicles parked under the entrance canopy — Home before you park

Automated swing gate with its operator arm mounted at the base of a stone pillar — Arm on the pillar

Solar panel mounted above a white aluminum gate powering its operator — Solar-powered leaf

Sliding gate between rendered pillars with clipped hedges either side — Slide between hedges

Before you call

Phone control
Operator sized to weight
Safety sensors
Loop detection
Two-leaf openings

Can my existing gate be automated?: Often yes. The frame has to carry the operator, so we check hinges, posts and weight first.
What happens in a power cut?: Every install gets a manual release, and battery or solar backup where the site suits it.
Is it safe around kids and pets?: Photo-eyes and edge sensors stop and reverse the gate. They are commissioned, not just fitted.
Can I still open it by hand?: Every install gets a manual release, and where it goes is part of the job — it has to be findable in the dark.