Do I need a permit for this?

Often, and Miami-Dade is inside the High-Velocity Hurricane Zone, so the wind rating matters too. Permits are issued locally, so we confirm what your authority wants before we start.

The High-Velocity Hurricane Zone — the Florida Building Code's strictest wind-load region. It covers all of Miami-Dade, which is why the hardware spec here is not the spec further north.

Can my existing gate be automated?

Often yes. The frame has to carry the operator, so we check hinges, posts and weight first.

What happens in a power cut?

Every install gets a manual release, and battery or solar backup where the site suits it.

Automatic Gate Systems in South Miami, FL

Ram-arm operator fitted to the hinge post of a light aluminum swing gate

Concept · illustrative

Safety and backup · South Miami, FL

Photo-eyes, edge sensors and a manual release on every install.

Get a quote

(954) 245-0182

Technician working at the control post of a tall ornamental iron gate in front of a palm-lined house. — The estate belt — Deeper setbacks and mature canopy south-west of the city — the openings with room for a two-leaf gate.

South Miami · Miami-Dade County

Two things separate a commissioned gate from a fitted one. The detection actually stops and reverses the leaf, tested rather than assumed. And there is a manual release you can find in the dark, with battery or solar backup where the site suits it.

A long approach and two heavy leaves is where photo-eyes and an edge sensor are doing real work rather than ticking a box — there is enough travel for something to be standing in it.

Wider frontages tend to favour a slide or a long swing pair, and both want the ground under them prepared properly.

Two approvals, not one

Anything structural at the property line in Miami-Dade answers to the High-Velocity Hurricane Zone standard, and that is what sets the frame and the fixings. Separately, South Miami runs a local review, and where a homeowners' association governs the street it generally runs one of its own. Neither is a thing to discover after fabrication.

Automatic Gates — the full breakdown

Before / after

Drag it backto how we found it.

Same job, same angle. Nothing staged between the two frames.

Technician marking a driveway beside a concrete saw before the safety loop is cut — Safety loopCut, laid, sealed, gone

Technician sealing the finished underground loop cut in the same restored driveway — Safety loopCut, laid, sealed, gone

Automatic Gates · South Miami

05 frames

Solar panel mounted above a white aluminum gate powering its operator

Solar-powered leaf

Sliding gate between rendered pillars with clipped hedges either side — Slide between hedges

Technician sealing a finished underground safety loop cut in a driveway — Loop sealed in

Lit modern house at dusk with vehicles parked under the entrance canopy — Home before you park

Automated swing gate with its operator arm mounted at the base of a stone pillar — Arm on the pillar

Before you call

Phone control
Operator sized to weight
Safety sensors
Loop detection
Two-leaf openings

Do I need a permit for this?: Often, and Miami-Dade is inside the High-Velocity Hurricane Zone, so the wind rating matters too. Permits are issued locally, so we confirm what your authority wants before we start.
What is the HVHZ?: The High-Velocity Hurricane Zone — the Florida Building Code's strictest wind-load region. It covers all of Miami-Dade, which is why the hardware spec here is not the spec further north.
Can my existing gate be automated?: Often yes. The frame has to carry the operator, so we check hinges, posts and weight first.
What happens in a power cut?: Every install gets a manual release, and battery or solar backup where the site suits it.